May. 26, 2021
How To Protect Solar Street Lights?
Solar Street Lights Suppliers will share this article with you.
Solar panels are cheap to maintain because you don’t need to hire an expert and you can do most of the work yourself. Are you still worried about the maintenance of your solar street lights? Then, please continue reading to understand the basic knowledge of solar street lights maintenance.
Clean the panel
Over time, a large amount of debris and dust will accumulate on the outer screen of the battery panels, hindering their ability to absorb sunlight. It is important to clean the panel at least once every six months. Regular cleaning will ensure that the panel works effectively.
This may sound reckless, but cleaning the panel is like cleaning your car. So, the first step is to wet them with a hose. This can wash away all loose dust particles and debris, and then use a soft brush with soapy water to wipe off the hard dust layer on the panel. Be careful not to scrub vigorously.
Then wash off all the soap with water to make sure that no soap remains on the panel. Also, don't forget to dry the water at the end to avoid any dry water spots.
Pruning trees and shrubs
The fewer shades of solar street light panels, the more sunlight they absorb. Therefore, more power will be generated. Removing shadows from the sunlight path to create objects is a key step for solar street lights.
Pay close attention to the shrubs and branches around your solar street lights and trim them regularly so they don’t hinder power generation.
Clean the light globes
If you have always noticed that the bulbous lights of your solar street light are very dim, solar panels and batteries may not be the cause. Sometimes, it is the globe that needs to be cleaned. Since they are exposed to the outdoor environment most of the time, dust and debris do cover the outer layer of the globe. Therefore, it is best to remove them from the poles and wash them thoroughly with soapy water. Don't forget to dry the water at the end to make them more shiny.
Check battery corrosion
The corrosion of the battery or its connection will cause the power output of the solar street light to be significantly reduced. To check the battery, carefully remove it from the fixture, and then check whether there is dust or slight corrosion near the connection and other metal parts.
Check the connections and wires
You should check any wires that might be damaged and broken connections every 3 to 6 months. Following this step will significantly increase the life of your solar street light. Perform a detailed analysis of the line. If you find any irregularities or problems in the line, change them before shutting down the entire system for a small problem.
Solar street lights are simple to use, but like other electrical appliances, they need to be used with care. Proper maintenance of solar street lights can extend their service life and give you value for money. Maintenance is not difficult, all you have to do is to be aware of the state of solar light and find problems before it seriously affects electricity production.